Three Ways To Avoid A Boiler Breakdown

Boiler efficiency is important not only for cost savings, but also productivity. Remember that you play a role in how well your boiler operates. There are a number of key things you can do to keep your unit operating more efficiently and to prevent a breakdown.


Make it a point to clean the area around your boiler occasionally. A serious problem is dust accumulation. Unfortunately, not only is environmental dust a problem, but when in operation, a boiler can produce quite a bit of dust as well, only adding to the problem. If the dust accumulation becomes excessive, it can start to make its way into the interior of the boiler.

Particularly when it comes to areas like the fan, this accumulation inhibits it optimal operation. The more dust on the fan the slower it operates. This can lead to higher operating cost and higher internal temperatures, which increase the chance of a malfunction.


It's also important to de-scale the boiler. When hard water flows through the boiler, it also causes a natural lime-scale buildup to occur around the interior surfaces. This scale serves as somewhat of an internal barrier that prevents the boiler from heating up as fast as it once did.

This reduction in heating capacity requires the boiler to work harder, which in turn increases wear and tear and the risk of a malfunction. Unfortunately, there is no set guideline for the frequency at which this step should be performed. As a general rule of thumb, the harder the water, the greater the level of lime buildup so the more often de-scaling becomes necessary.

Water Level Verification

One of the most important factors dictating a boiler's proper operation is maintaining the right amount of water. If there is too little water inside the boiler, you could be looking at permanent damage to the unit. It's a good idea to get in the habit of checking the water level inside the boiler on a regular basis by simply looking at the gauge.

Generally, a water level issue can easily be resolved by a professional. In many instances, the solution is as simple as adjusting the water intake settings. However, if you notice that the water level is decreasing, it's best to contact a professional to get to the bottom of the problem as there could be a more pressing cause.

In the event of a malfunction with your boiler, make repairs a priority. A number of issues can start off relatively minor and progress into something costlier. The faster you respond to an issue the better chance you have at keeping repair costs low and productivity high. At the first sign of a problem, call on a professional repair technician. Contact a business, such as Vowel Plumbing & Heating, for more information.