If you want to maximize the efficiency of your home, you need to make sure your windows are airtight. After a number of years, the weatherstripping along your movable windows, whether they are sliding or casement fixtures, can get worn off or peeled away. You can usually invest in affordable felt weatherstripping to fix this problem. This article explains how to best remove your existing weatherstripping and how to install a new product.
Removing the Existing Weatherstripping
You need to be thorough when removing your existing weatherstripping if you want to make sure you get all the stripping and any adhesive off the surface. On some windows, there will only be insulation on the movable sash. On others, the insulation will just be on the actual window frame. Rarely, there will be weatherstripping on both. Regardless, if you want to be thorough, you should remove all of it and start fresh.
The most important things you need for removing the weatherstripping is a putty knife and some degreasing cleaner. You actually don't want to use a knife that is too sharp because it could actually gouge your window, depending on what material it is made out of. A smooth blade will allow you to scrape away the weatherstripping without scraping the paint off of your window.
Cleaning the Adhesive
Once you have removed the stripping, there is probably going to be some adhesive still stuck to the frame. Using a sponge and a citrus-based cleaner, you will probably be able to remove all of this. This might take a little bit of time and elbow grease, but you want your window to be as clean as possible.
Applying the New Weatherstripping
When it comes to applying the new weatherstripping, the job is much easier if you buy tape-style stripping. This is very easy to apply; you just peel off the paper backing and stick it onto the frame. For the best results, you should apply one full piece on each window. That is, don't cut a single strip for every side of the window. Instead, just bend the weatherstripping when you get to the corner and push it down firmly. Any gaps between separate pieces are bound to let air through and reduce the efficiency of your windows.
This is obviously a very simple project. In the long run, it will add some cushion to your sliding windows and reduce the sound of slamming. Most importantly, you will enjoy greater insulation. Talk to a company such as Port Orchard Glass for more information.